|
Crown's iTech seris of amplifiers are amazing! We use them for just about everything. Pictured here are our two primary touring racks. Gone are the days of outboard DSP's and signal processsing. The iTech's powerful on-board DSP and iQuic software allow us to manage complete signal control at the amplifier, and do it remotely from a touch screen PC or tablet. We can even work on it live while the system is running and save show configurations for recall later. The software allows us to create custom control surfaces for the specific needs of any event , show, or installation.
I-Tech Series
New! I-Tech Drop Test Video
|
Power Output
|
|
|
Dual
|
Bridge
|
|
2 Ohm
|
4 Ohm
|
8 Ohm
|
4 Ohm
|
8 Ohm
|
|
20 msec BURST
|
1 kHz
|
20 Hz -
20 kHz
|
20 Hz -
20 kHz
|
20 Hz -
20 kHz
|
20 Hz -
20 kHz
|
20 Hz -
20 kHz
|
|
I-T4000
|
2,565
|
1,800
|
1,800
|
2,000
|
1,250
|
3,600
|
4,000
|
|
I-T6000
|
4,570
|
2,500
|
2,500
|
3,000
|
1,500
|
5,000
|
6,000
|
|
I-T8000
|
5,900
|
3,500
|
3,500
|
4,000
|
2,100
|
7,000
|
8,000
|
Guaranteed minimum power in watts with 0.35% THD
Touring sound. Earth-shattering performance. I-Tech's patented class-I technology is the number one choice of touring professionals worldwide.
- Global Power Supply – designed to deliver maximum power no matter where your
schedule takes you
- Studio Quality Processing – integrated processing reduces DSP noise for a quieter
overall system
- Peak voltage and RMS power limiting protects your speaker investment
- Front panel LCD provides diagnostics and preset selection to ensure fast and
easy system setup
- Front panel lockout – ensures that tunings and presets are safely stored and protected
from curious users
- Remote monitoring and control for complete system control anywhere in the venue
For product availability and pricing please contact your local dealer.
|
|
| Performance |
I-T4000
|
I-T6000
|
I-T8000
|
| Input Sensitivity (volts RMS) for rated output |
Adjustable in 0.1V steps from 1.4V to 7.75V
|
| Voltage Gain for full rated power at 8 ohms |
37.1 dB to 22.2 dB
|
37.9 dB to 23.0 dB
|
39.3 dB to 24.5 dB
|
| Frequency Response (at 1 watt, 20Hz - 20 kHz) |
± 0.25 dB
|
| Signal to Noise Ratio below rated full-bandwidth power, A-weighted |
> 105 dB
|
| Total Harmonic Distortion (THD) at full rated power |
< 0.35%
|
| Intermodulation Distortion (IMD) 60 Hz and 7 kHz at 4:1, from full rated output to –35 dB |
< 0.35%
|
| Maximum Input Level |
+15 dBu or +21 dBu, depending on setting of maximum input level
|
| Latency (analog, digital inputs) |
Analog: 1.13 mS. Digital: See Sample Rate / Latency Table below.
|
| A/D, D/A Converters |
24-bit 96 kHz Cirrus Logic
|
| Digital Input |
AES/EBU, 24-bit, 32-96 kHz. Onboard sample rate converter.
|
| Network |
Onboard HiQnet and TCP/IQ, compatible with standard 100Mb Ethernet hardware
|
| DSP |
24-bit conversion with 32-bit, floating-point DSP processing
|
| Attenuators |
Speed-sensitive rotary encoders, 0.5 dB steps, range 0 to –100 dB.
|
| Damping Factor (8 ohms): 20 Hz to 100 Hz |
> 5000
|
| Crosstalk (below rated power, 20 Hz to 1 kHz) |
> 80 dB
|
| Common Mode Rejection (CMR) (20 Hz to 1 kHz) |
> 50 dB
|
| DC Output Offset (Shorted input) |
< ± 3 mV
|
| Input Impedance (nominal) |
20 kilohms balanced, 10 kilohms unbalanced
|
Load Impedance (Note: Safe with all types of loads)
Stereo
Bridge Mono |
1-2-4-8-16 ohms
2-4-8 ohms
|
| Required AC Mains |
Universal AC input, 100-240VAC (±15%), 50/60 Hz. Max. AC mains voltage 277VAC.
|
| AC Line Connector |
USA, UK, European, Australia, India
|
| Construction |
All Models
|
| Ventilation |
Flow-through ventilation from front to back
|
| Cooling |
Dual-zone, microprocessor controlled, continuously variable speed fans
|
| Dimensions |
EIA Standard 19-inch rack mount width (EIA RS-310B), 3.5-inch (8.9-cm) height, 16.2-inch (41.1-cm) depth behind front mounting surface
|
Weight
Net
Shipping |
28 pounds (12.7 kg)
36 pounds (16.3 kg)
|
|
|
